Rotatable gear clevis
Depending on the compact design, MEGAMAT XS could be applied to the head part of the care bed. And the noise is low, which helps create a good environment. Moreover, the actuator could be matched with all MEGAMAT2 stroke pipe u-clips.
MEGMAT XS reaches the max. pull force and push force of 3000N with the adjustment speed of 30mm/s and max. stroke of 500mm.
Compact design |
|
Applied in head and front lift |
|
High IP degree |
|
Low noise |
|
Available configurations |
|
Load capacity:Max. 3000 N push force / Max. 3000 N pull force |
|
Adjustment speed:Max. 30 mm/s |
|
Stroke:Max. 500 mm |
|
MEGAMAT 2 stroke pipe u-clip could be used |
Technical data |
|
---|---|
Load capacity |
Max. 3000 N push power Max. 3000 N pull power |
Adjustment speed |
Max. 30 mm/s |
Stroke |
Max. 500 mm |
Installation size (B) 2 |
Min. 160 mm + stroke |
Duty cycle |
2/18min or 10%,max. 5 switching cycles per minute |
Motor voltage |
Maintenance-free 24 V DC motor |
Travel switch |
Micro switch |
Stroke pipe u-clip |
Drilling: 10 mm Notch:5 mm |
Gear clevis |
Adjustment angle (45°、90°、135°) Drilling:10 mm Notch:5 mm |
Stroke pipe |
Aluminum |
Guide rail |
Anodized aluminum |
Color |
Light grey RAL 7035 |
Others |
|
Protection degree |
Max. IPX6 |
Protection class |
III |
Relative humidity |
30% - 75% |
Ambient temperature |
+10°C - +40°C |
Performance data |
|
---|---|
Control unit |
Without relay |
Seen in the technical drawing