The DD11S uses proven technology from the high-end ID21 lifting columns with a patented OKIN sliding system. With optimized profile strength, these lifting columns feature improved stability so that they comply with the requirements of the FB147 pendulum impact test.
This system is perfectly suited for use in stable desks. The elegant profile, already in use for the high-end ID21 lifting columns, provides another distinguishing feature. The modern design of the DD11S has no visible function openings and only a minimal difference between the individual profiles.
Intelligent technology insideOKIN is also using its high-end technology for the DD11S. Powerful, maintenance-free 24-volt DC motors with two Hall sensors are used; these generate a compressive force of up to 700 Newton. Their special gear ensures whisper-quiet operations. The DD11S has a very low installation dimension of only 645 mm and a standard-compliant stroke length of 500 mm. Thus, these lifting columns provide an exceptional level of practical versatility for adjusting tables.
The DD11S can also be configured with optional accessories such as different table legs, frames and handsets. The lifting columns are compatible with OKIN’s well-established SmartEco and COMPACTeco(+) control units, which can be programmed according to user requirements. They also feature ISP intelligent system protection.
An overview of the key features
Patented sliding system for excellent stability
Smooth profiles without holes or grooves
Minimum air gap between the individual profiles
Powerful 24 V DC motor with 2 Hall sensors
Special gear for whisper-quiet operations
All column profiles move synchronously
Use for constructing stable table systems according to DIN EN 527 and DIN Fb 147
German engineering and design
Produced in the EU
|max. 700 N / 157 lbs pressure|
|Adjustment speed: max. 35 mm (1.38")/second without load *|
* Depending on the drive configuration, at const. 24/29 VDC with no load.
|500 mm / 19.68''|
|2-part rectangular steel column, upward-telescoping, inner profile telescopes out|
Fitting dimension (B)
|645 mm / 25.59"|
|2/18 min. or 10%|
|Maintenance-free 24 V DC motors|
|Top: using virtual limit switch|
Bottom: using virtual limit switch
|black RAL 9005, silver RAL 9006, white RAL 9016|
|1200 mm / 47.24", smooth – Mini-Fit Jr. plug 4.2, 2x4|
Relative air humidity
|30% to 75%|
|+ 10 °C to + 40 °C|
|Table feet, table frames, control units, handsets|